Guide to: Quality Flow Project Set-up

This article is intended as a starter guide for users who want to learn how to set up or configure projects within the Quality Flow Projects framework, which is different from ADAP jobs and workflows. Please talk to your CSM if you'd like to know more.

Example Quality Flow Project

Overview

1. Create your Project
2. Upload data to your Project
3. Create & Design your Work Job
4. Configure your Work Job settings
5. Route data into your Work Job
6. Run your Job
7. Create your Quality Assurance Job

Create a Project

Quality Flow can be enabled as a flag on your team, which you can request from your CSM. Once enabled, look for the “Projects” icon in the lefthand sidebar.

When you click the icon, you’ll be brought to an empty project page, or a list of existing projects if someone else on your team has already created any, along with some high level information about the Project, such as the creation date, number of units and a raw progress bar.

To create a project, click “Create Project”, in the top right of the Projects list page. The first pop-up you’ll see will look as follows. You will need to name your project and optionally give it a description. Once you click "Confirm" you will be taken back to the Projects list page.

Once back in the Project list page, click on your new project; you will be taken to the DATASET page.

You will see four tabs across the top of the page.

• Dataset — this is your landing page where you upload and download data and perform actions on data such routing to jobs.
• Jobs — this is a canvas where you create Jobs and link them via flows.
• Curated Contributors — this is where your Appen Managed Services team will manage any curated contributors.
• Dashboards — this is where you monitor your throughput and quality, as well as download your results as reports.

Upload data to your Project

On the DATASET page you'll be prompted to add data. You can skip ahead and create Jobs without adding data, but it is recommended to add data first as this will help to ensure your Job design and data structure are aligned from the start.

• Quality Flow Projects expects a .csv or .tsv like other ADAP jobs
• If you are using image, video or audio annotation tools, Quality Flow Projects expects input data to be an object such as a CDS link.
• If you wish to use the Unit Groups feature, please make sure to read this article on formatting your upload data first.

You can add more data at any time by clicking on "Add More Data".

After you have uploaded some data, the table on the DATASET page will become populated. Additional columns will appear in the data table, such as the following, which are grouped into sections including “unit” and “source”.

• • Unit ID — this is an automatically generated ID specific to Quality Flow
  • Job title — this will be blank until the unit is sent to a Job, after that it will show the Job that the unit is currently in.
  • Job ID — this is the Job ID associated with the Job title.
  • Status — status of the unit. See Statuses.
  • Created At — this will show the date/time of the record.

To see all available columns, or to select which columns you want to view click on Columns.

• Columns are filterable and sortable, but note that while your column selections will persist until you change them again, your filters will only persist while you do not navigate away from the page.

Create a Job

To create a job in your project click on the JOBS tab. If you have already uploaded data, you’ll see a box on the canvas that says “ALL DATA” which will show the number of units you’ve uploaded. At the bottom of that box, click the small + to add a job.

If you have not already loaded data you will prompted to do so; it is recommended to add data before designing your job(s).

When you click the + at the bottom of the ALL DATA box, you’ll be prompted to give your new job a title.

Once you name your job and click “Confirm”, you’ll be brought to the template screen.

Design your Job

From here, you will be taken to the DESIGN tab for the new job and you can proceed with designing your Job, as usual (see this article).

Configuring Leading Job Settings

In order to configure settings for your Work job, skip the QUALITY tab and go straight to SETTINGS, where you will see three settings tabs: Contributor Settings, Prices & Rows Settings & Review.

If you click into the QUALITY tabs, for Work Jobs you’ll see that there’s nothing configurable for Work Jobs currently.

Prices & Rows Settings

This is where you set your rows per page, lease expiry time and max number of units.

• Judgments per row can be set from 1-20. Please see this article for important information about collection multiple judgments in Quality Flow -- the number of judgments cannot be changed once a job is running.

• If you are using Unit Groups you will be asked to retain or ignore groupings, see Unit Groups for details. 

• Adjust the number of units you would like displayed per page.

• Adjust the lease expiry in line with how much time you think a contributor will need to complete units. (If you are using Unit Groups, set the Assignment Lease Expiry time to allow the contributor to complete the entire unit group.)

• If you want to limit the number of units a contributor can complete in the Job, ensure you select Enable max Judgments per Contributor and specify the max number of units (this can be useful in early testing and callibration stages for example, and it can be adjusted after a job has been running). Otherwise, keep this toggle to OFF.

• If you want to allow contributors to abandon (or skip over) units, you can select Allow Abandon Units (Abandoned units will go back to the contributor pool to be worked on by someone else, they will not go back to the original contributor). Otherwise keep this toggle OFF.

Save your settings.

Contributor Settings

External 

This is where your Managed Services team will manage any curated contributors. It is not yet possible for the general contributor population to work on jobs in Quality Flow Projects.

Internal

Here is also where you can assign contributors from your Project Resources (see this article), or copy the internal link to share with your in-house teams and start annotating.

Review

On the next page click on the button “Switch to Preview Mode”. This will put the job into a PAUSED state and make it available for units to be routed. You can add data to Jobs that are PAUSED or RUNNING see (see Job States). 

Sending data to a Job

Once you’ve instantiated your job, you’ll want to send data to it. Return to the DATASET tab and select some data that you want to be processed in this job (see this article for data management options and suggestions).

Once you have some units selected, click on the Actions dropdown, and choose Send Selected Units To A Job. Start typing the name of your target job in the field and select it when it pops up.

Note: Jobs in DRAFT state will not be available to send units to (see Job States).